Tactical Scorpion Gear - Level III AR500 / Lightweight Level III+ Steel Body Armor 8" x 10" Plate

Rating:
100% of 100
Starting At $35.06
Availability: In stock
Only %1 left
SKU
TSG810-1-AR

Your choice of Level III AR500 or Lightweight Level III+ steel core armor plates.

Tactical Scorpion Gear AR500 steel core armor .(Made in the USA)

  • A stand alone armor plate with multiple hit capability
  • We only manufacture our plates from certified AR-500 steel with a Brinnell Hardness Rating of505-518BHN
  • Laser cut
  • Fully tested by independent Lab
  • Rated for up to six hits from 7.62 Nato bullets (.308 Winchester) with velocities up to 2780 fps

Tactical Scorpion Gear Level III+ steel plate armor . (Made in the USA)

We are Compliant with all NIJ standards so dont pay more for lesser quality products.

  • A stand alone armor plate with multiple hit capability - passed NIJ 0101.06 6 shot stand alone tests against 5.56 M855 M80 ball (greentip) at 2800fps and 5.56 M193 55 Grain FMJ at 2900fps. In house testing defeated 30-06 165 grain copper tip trophy.
  • Listed on the Department of Justice NIJ certification website.
  • Level 3+ plates are manufactured from a proprietary steel reaching Brinnell Hardness ratings in 600 - 630
  • Laser cut
  • Simply Stronger, Thinner and lighter than the competition

Our new proprietary steel core is far stronger than the AR500 - AR650 steel core. This core is hardened all the way through unlike the AR500 - AR650 which is only surfaced hardened. At only 0.197 inches thick nominal makes it 20% lighter than the AR500 and superior in strength.

 

Tactical Scorpion Gear 10 mm Trauma Pad

  • Custom made , computer cut on triple axis CNC router machine to perfectly match our armor plate
  • Will absorb the impression of any projectile impact onto the armor plate protecting your ribs from the compression

** This model complies with NIJ Standard-0101.06 for Ballistic resistance of Body Armor.**

We utilize a CNC laser cutting table for the cutting of all our Steel core products. If the seller of armor plate does not mention how its cut, then you can guarantee its not by laser There is no equal method

Plasma cutting cuts slowly, this puts a lot of heat into the steel. ( Submerged plasma cutting machine is no better) This excess heat can result in excessive chipping and damage near the cut edge during use and easily shattering when shot. Plasma cutting generates large amounts of heat that is deposited into the target, softening it's edges. The heat-affected zone (HAZ) generated by plasma cutting is the largest out of the most commonly used methods for cutting abrasion resistant steel. Most AR500 is cut with plasma cutters as they are cheap and relatively small compared to other methods.

Tested by HP White laboratory

** This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor.**

NIJ tested Level III Armor will defeat 6 rifles round shots up to 7.6251/.308 @ 2780 ft/s @ 15 METERS

For armor weights go to: https://tacticalscorpiongear.com/armor-weights-information.html

More Information
UPC650076278997
Dimension14" x 12" x 4"
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account